Three faults, one of them mine and one that had been there from the start.
The braces were the change this session declined and that reached the repo
anyway, in 715d6af: moved outboard of the uprights, where they connect to
nothing and read as broken sticks. Reverting them was not enough, because
the version they replaced was also wrong -- a single diagonal tilted about
Z, in the same plane as the bell, which had to be shoved in front of it and
drew a line straight across the one silhouette in this model that has to
read cleanly. Neither is what a bell frame does. A real frame is two
A-frames, one at each end of the beam, braced fore-and-aft in their own
planes, with the bell swinging in the gap. Tilting about X instead of Z
puts them there and the bell is never in the way.
The uprights stood at beamLength * 0.34, which at the default yoke is 0.165
against a bell radius of 0.18. With their half-width they spanned 0.147 to
0.183 and ran through the mouth of the bell. Nothing objected: the support
test sees one connected mass, which is precisely what a post driven through
a bell looks like. They now stand at the larger of the yoke's reach and the
bell's radius plus a margin, so a short yoke cannot close the frame onto
the bell -- and the beam's span is derived from that rather than from the
yoke alone, because decoupling the two first left the rail too short to
reach the uprights at the bottom of the slider and the two A-frames came
apart into separate objects.
The foot sat height * 0.16 below the mouth, leaving 24 mm between sill and
lip. A bell hangs clear of its sill; at that gap it read as resting on one.
Colour last. The bell was painted from the `brass` entry and rendered at
hue 39 / saturation 0.56 / value 0.56, against a reference at 33 / 0.34 /
0.33. That is not a subtle disagreement and, unlike the hay bale, the
measurement can be trusted here: a bale photographs desaturated because it
is thousands of straws shadowing each other, while a cast bell is a smooth
surface, so the number is the material rather than the texture. A separate
`bronze` palette entry, derived by inverting the renderer's own gain,
brings it to 30 / 0.31 / 0.43. It is a palette entry and not a slot -- the
mesh still resolves through `brass` -- so the coin pouch and the book's
corner fittings, where fresh yellow bronze is right, are untouched.
27 models, 18457 triangles, all checks pass, 0 floating cases, build clean.
Two rules were missing, and each one had been quietly failing for a while.
The first is structural. Every check in this repo asked about surfaces --
winding, coplanarity, triangle counts -- and none of them could see a piece
of a model hanging in the air with nothing holding it up. A chest lid
separated from its chest passed everything we had. scripts/support.ts
voxelises the model, finds the connected components of occupied space and
requires each one to reach the floor; scripts/audit.ts runs that across
default, min, max, both sweep ends, actions and the midpoint of a morph, so
a variation cannot break what the default gets right. That audit started at
22 failing cases: the bell and the sign had no supporting structure at all
and now have a frame and a post, the lantern was in four pieces, the sack's
collar floated above its body, the basket's fruit hung level with the rim
instead of resting on the base, and the ladder's rungs were sized by a
formula that disagreed with where the rails actually were. It now reports 0.
The second is that we had no target. The feedback loop was an offline
render of our own output, which can only answer "is this broken", never
"is this right". Given a reference photograph of a cask, five defects were
obvious in seconds that three rounds of self-review had missed: four hoops
where there should be six, no rivets at all, a chime cut so shallow it did
not read, and a stave count low enough to leave a visibly polygonal
silhouette. All four are fixed here.
Two things the rivets taught us, both kept as comments rather than as
scars: a stud that tapers outward tilts its side normals back towards the
axis, which the radial check correctly reports as reversed winding -- a
real rivet head flares, so the honest shape is also the passing one. And
once seated deep enough to look right, the stud's buried inner cap falls
inside the shell the check inspects, so it is not generated at all, exactly
as bandGeometry already declines to build the inside of a hoop.
27 models, 16973 triangles, all checks pass, 0 floating cases.
The kit is going public, so everything a reader sees is now English:
27 model sources, the core vocabulary, meta.ts (titles, descriptions and
every slider label), the viewer UI, all script output, REFERENCE.md and
the READMEs.
Rules applied: only comments, doc comments and human-facing strings were
touched. Identifiers, numbers, logic, registry item ids, part names and
material slot names are unchanged — those are a published contract and
were already English.
Verified rather than assumed: for all 53 changed .ts files the code
skeleton (source with comments stripped and string contents replaced by a
placeholder) is byte-identical before and after. Full gate is green —
typecheck, registry conformance, ~510 model checks, GLB round trip and a
production build.
Also fixed here:
- index.html and viewer.html were missed by the translation pass because
the file list only covered .ts/.md/.css. Both had lang="tr" and Turkish
titles.
- The viewer formatted triangle counts with toLocaleString('tr-TR'), which
prints 15.425 rather than 15,425.
- REFERENCE.md's model table header did not match what
scripts/catalog-table.ts emits, so the next regeneration would have
silently changed it. Aligned to the generator.
- Removed scripts/probe.ts and scripts/zdiag.ts; they were throwaway
diagnostics that got committed by accident.
Modeller (13 → 26): chest, bench, torch, lantern, bell, sign, hay bale,
sack, broom, tankard, book, phial, coin pouch. Kürek, çapa ve yaba
render'lara bakılarak yeniden yazıldı.
core:
- createKitModel artık tipli `actions` ve `update(dt)` taşıyor
- BuiltPart.extras: bir parça birden çok materyal yuvası kullanabiliyor
(sandığın kapağı = meşe tahta + demir kayış, birlikte dönmek zorunda)
- BuiltPart.origin: parça başına dönme merkezi (menteşe, sarkaç)
- bendGeometry / roughenGeometry / mottleGeometry
- 5 yeni materyal yuvası: steel, brass, straw, cloth, leather, glass
- bandGeometry({ inner }) — serbest halkalar kapalı katı olabilsin
my-registry/meta.ts: katalog metadata'sı artık build.ts ve viewer için
tek kaynak. Doğrulama modelle metadata'nın uyuştuğunu denetliyor ve bu
eklendiği gün dört modelde gerçek bir sapma yakaladı.
Doğrulama (~500 kontrol):
- metadata uyumu, eylem semantiği, kare hızı bağımsızlığı
- scripts/render.ts: tarayıcısız yazılım rasterleyici. Bütün doğrulama
geometrikti; "bu kürek küreğe benzemiyor" diyebilmek için modele
bakmak gerekiyordu
- scripts/verify-glb.ts: dışa aktar → geri oku → karşılaştır
GLB dışa aktarımı: viewer düğmesi ve toplu CLI aynı kodu kullanıyor.
Viewer:
- parça paneli (solo/izole) ve materyal yuvası paneli (canlı renk override)
- kit görünümü: 26 model tek sahnede, ölçek ve ton tutarlılığı için
- configure() sonrası gölge bayraklarının düşmesi düzeltildi
