A village well: a drystone kerb, a timber frame over it, a windlass with
its collars and crank, and a rope and bucket that lower down the shaft.
`setDepth` and `setWinding` drive the bucket; its part origin is the
roller's axis, so winding is a translation and costs nothing per frame.
The kit had no masonry at all, which for a medieval catalogue is a hole
rather than an omission -- a well, a trough, a millstone, a boundary wall
and a hearth are all stone before they are anything else. `stone` is the
twelfth slot. Its colour sits close to weathered oak on purpose: what
separates the two at a glance is not hue but that stone scatters light
completely flat, and roughness is not something vertex colour can carry,
which is exactly the argument the slot table makes for keeping iron and
steel apart.
Four faults on the way in, and three of them are ones this session has seen
before in other models.
The blocks were written footprint-first as [wall, arc]. `rotateY` carries a
footprint's +Z out along the radius and its +X round the circumference, so
every block sat across the ring rather than along it -- each one sticking a
block's length out of a wall a block's width thick. The kerb came out as
rubble thrown at a circle.
The rope started at the roller's axis, which put its whole surface inside
the barrel's hollow interior touching nothing. Then it started in the eye
of the wound coil, which is also a hole. It has to begin within the coil's
material, between 1.0 and 1.34 of the roller radius, so that it crosses the
coil's outer face on the way down.
The actions set `anchor.position.y = 0`, which destroys what `origin` had
just done and dropped the whole rope and bucket by the height of the
roller. Everything the actions touch is now an offset from where the origin
put the anchor.
And the masonry was over the triangle budget at 2 784, almost 1 900 of
which were chamfers on forty-four blocks -- edges the roughen pass softens
anyway, and stone is the one material here where a sharp arris is not
wrong. Plain tapered boxes bring the model to 1 376.
Two things about the wall itself, both from looking at it. Varying each
block by a tenth in arc and thickness put every stone at its own radius and
its own width; a dry wall is irregular the way a hand-cut stone is
irregular, which is a few percent. And blocks cut to exactly their share of
the arc cannot close: a flat face on a curve leaves a wedge of daylight at
every joint, so they are cut long and bite into each other -- safe here
because each is rotated to its own angle and no two adjoining faces are
parallel.
29 models, 22 043 triangles, all checks pass, 0 floating cases, GLB
round-trip clean, Conformant, build clean.
