/** * @medieval-kit/wooden-bench * * The bench that sits beside the trestle table. In the middle ages a chair was * a status object; what people actually sat on was a bench, so a hall scene * needs one even more than it needs the table. * * Its structure is a simplified version of the table's: two thick end boards, a * stretcher between them, the seat on top. But one thing differs from the * table — the seat IS fixed to the legs. The table's top could be lifted away, * a bench's seat cannot; so the legs are joined by tenons that run into the * seat, and those tenons show through the top of it. That is the signature of * medieval joinery. */ import { boxGeometry, chamferedBoxGeometry, createKitModel, createTinter, jitter, mergeColoured, taperedBoxGeometry, } from '../core/index.ts' export interface WoodenBenchConfig { /** Bench length (metres). */ readonly length: number /** Seat height (metres). */ readonly height: number /** Seat width (metres). */ readonly width: number /** Outward splay of the legs. 0 = upright. */ readonly splay: number /** How far the legs stand in from the ends, as a fraction of the length. */ readonly inset: number readonly seed: number } export const woodenBenchDefaults: WoodenBenchConfig = { length: 1.62, height: 0.45, width: 0.3, splay: 0.24, inset: 0.13, seed: 31, } export type WoodenBenchParts = 'seat' | 'legs' | 'stretcher' export function createModel(overrides: Partial = {}) { return createKitModel({ id: 'wooden-bench', defaults: woodenBenchDefaults, slots: ['oak'], build: ({ config, random }) => { const tint = createTinter(random) const half = config.height / 2 const seatThickness = config.height * 0.09 const seatTop = half const seatBottom = seatTop - seatThickness const timber = config.width * 0.09 // --- Seat ---------------------------------------------------------- // A single thick board. Using two boards is not as natural on a bench // as it is on the table: the seat must not have a gap down the middle. const seatPieces = [chamferedBoxGeometry( [config.length, config.width * 0.95], [config.length * 0.995, config.width], seatThickness, timber * 0.4, [0, seatBottom + seatThickness / 2, 0], tint('oak', 0.05), )] // --- Legs ---------------------------------------------------------- const legX = config.length * (0.5 - config.inset) const legHeight = seatBottom - (-half) const legWidth = config.width * 0.66 const spread = legWidth * config.splay const legPieces = [] for (const side of [-1, 1]) { // Leg board: it widens on the way down. The splay is in the measure, // not in the angle — widening the bottom face instead of rotating is // both cheaper and lets the foot sit FLAT on the ground, whereas a // rotated leg stands on its edge. legPieces.push(taperedBoxGeometry( [legWidth + spread * 2, timber * 1.35], [legWidth, timber * 1.35], legHeight, [side * legX, -half + legHeight / 2, 0], tint('oak', -0.02), )) // Tenon: the end of the leg that runs THROUGH the seat and shows on // top of it. It overshoots the seat's top face — the most recognisable // detail of a medieval bench. legPieces.push(chamferedBoxGeometry( [legWidth * 0.34, timber * 0.85], [legWidth * 0.32, timber * 0.8], seatThickness * 1.9, timber * 0.16, [side * legX, seatBottom + seatThickness * 0.75, jitter(random, timber * 0.1)], tint('oak', 0.09), )) } // --- Stretcher ----------------------------------------------------- // The batten tying the two legs together. It runs INTO the legs: its // ends stay inside solid material so that no face ends up coplanar. const stretcherY = -half + legHeight * 0.34 const stretcher = mergeColoured([boxGeometry( [legX * 2 + legWidth * 0.4, timber * 1.5, timber * 0.95], [0, stretcherY, 0], tint('oak', -0.06), )]) return { seat: { slot: 'oak' as const, geometry: mergeColoured(seatPieces) }, legs: { slot: 'oak' as const, geometry: mergeColoured(legPieces) }, stretcher: { slot: 'oak' as const, geometry: stretcher }, } }, }, overrides) }